How To Shock A Well. Shock chlorination is a relatively inexpensive and straightforward procedure used to control bacteria in wells. Turn off the pump circuit breaker and put the well cover back in place.
How to Shock a Well YouTube from www.youtube.com
Turn off (or close) all water faucets outside and in the house so that you don’t. Shock chlorination is a relatively inexpensive and straightforward procedure used to control bacteria in wells. Wear rubber gloves and rubber sealed footwear to avoid electrocution.
Turn Off The Power To The Pump And Switch Off The Circuit Breaker.
It involves adding a large amount of chlorine to the water in the well. It is the cheapest way to shock the well, and anyone can do it. The shocking process of household well is not that difficult.
Always Add The Pellets To Standing Water And Not The Other Way Around.
Store water 2 days as per your consumption. After calculating the right amount of bleach, follow these steps to shock a well: If possible, place a garden hose in the top of the well, and turn on the faucet and circulate the chlorine solution for 15 minutes until a strong 50 ppm chlorine residual is detected, by using a.
If Possible, Mix The Water In The Well.
This can be accomplished by attaching a hose to a tap and running water from the well through the hose. This article explains how to shock a well, when, why, and exactly how to chlorinate a drinking water well. Turn off (or close) all water faucets outside and in the house so that you don’t.
These Are The Instructions For How To Shock A Well:
Some wells, especially those completed with buried pressure adapters or pitless adapters, may have a. You can’t use the well water immediately after shocking a well. Wear rubber gloves and rubber sealed footwear to avoid electrocution.
You Need Chlorinated Water To Disinfect The Well.
Pour the mixture into your well. Take off the well inspection plug located on the top of the well. This will clean the upper part of the well.
Post a Comment for "How To Shock A Well"